Pair 1/14 RC Dump Rear Fender Steel Dual Wheel Mud Flaps Mudguard Wheel Cover for Tamiya 1/14 Rc Tractor Truck Tipper Dumper

Give the rear end of your 1/14 dump truck or tractor truck the finished look of a real heavy-duty truck.

Each fender is stamped from steel sheet in one piece with no weld seams, forming a long wheel arch that covers both wheels of one rear tandem axle side and shields the chassis, body and cargo bed from mud, gravel and water spray thrown up by the dual rear wheels.

The electrophoretic black coating gives a smooth glossy finish that resists rust and matches black chassis parts and trim, while the clean sheet-metal arch lines keep the whole rear end looking tidy and scale-realistic.

Sold as a left + right pair with a complete mounting hardware set, ready to install out of the box.
 

2 × rear tandem axle metal fender (left + right, one pair)

1 × mounting hardware set (quantities as received): threaded rods, flange nuts, black screws and metal fixing clips

Wheels, tires, chassis, cargo bed, lights and other parts shown in photos are for display only and are not included.
 

Designed for the rear tandem axle (dual rear wheels) of 1/14 scale dump trucks and tractor trucks, for Tamiya 1/14 chassis and similar third-party builds.

Each fender measures 205.8mm in overall length, 55mm in body height and 43mm in arch height; overall height with mounting rods is 71.9mm. Please reserve enough space above your rear wheels.

Side tab holes are Ø1.6mm, body screw holes are R0.8 (Ø1.6mm) and arch top through holes are Ø2.9mm; the included 65.9mm threaded rods pass vertically through the fender and your chassis with the rod ends left exposed above the arch and secured with flange nuts, while the screws and clips complete the fixing. Please check against the hole positions of your chassis.

Please measure your rear tandem wheel span before ordering: the fender is sized to cover two wheels of one side in one piece.

Specifications

Scale: 1/14

Model: TP-128

Position: rear tandem axle, left + right pair

Material: stamped steel (iron), one-piece stamping, no welds

Surface: glossy black electrophoretic coating (e-coat)

Overall length per fender: 205.8mm

Body height: 55mm

Arch height: 43mm

Overall height incl. mounting rods: 71.9mm

Mounting holes: side tab holes Ø1.6mm, body screw holes R0.8 (Ø1.6mm), arch top through holes Ø2.9mm

Mounting rod length: 65.9mm

Weight (per pair, incl. hardware): 346g

Color: glossy black

Note

Fenders are supplied in left + right pairs; please check the dimensions and your chassis hole positions against your model before ordering.

The glossy e-coat surface may show reflections or slight marks under different lighting, which is normal.

Trucks, wheels, tires and other parts shown in the photos are for display only and are not included.

This is not an official Tamiya, Mercedes-Benz, Scania or IVECO product.

All brand and model names mentioned are for compatibility description only.