105mm Soft Rubber Tires Chevron Tread Sponge Inner for 1/14 Tamiya RC Truck Dump Tractor Crawler Climbing Off-Road DIY

Meet the climbing spec tire for your 1/14 truck.
The deep chevron (herringbone) tread bites into loose ground the way real agricultural tires do,
and the soft, high-friction rubber compound keeps the grip strong on rocks, gravel and wet surfaces.

Each tire comes with a foam insert.
The sponge liner supports the tire body under load,
so the tread keeps its shape while climbing instead of folding over.

At 105mm diameter and 38mm wide,
it lifts your truck higher and clears obstacles that standard 85–87mm tires scrape.
 

1 / 2 / 4 x Chevron climbing tires (per selected pack)
1 / 2 / 4 x Foam inserts (pre-matched to the tires)
(Wheels / hubs NOT included — shown for display only)
 

● Deep chevron tread — self-cleaning herringbone lugs pull the truck forward on mud, gravel and rock
● High-friction soft rubber — noticeably grippier than hard plastic or foam-only tires
● Foam insert included — supports the tire under load, keeps the tread planted while climbing
● Big 105mm diameter — raises ride height and obstacle clearance over standard truck tires
● Cross-scale fit — Ø43.5mm bead seat fits 1/14 hubs and any other chassis using the same hub size
 

Designed for 1/14 scale tractor trucks (Tamiya and third-party 1/14 hubs, Ø43.5mm bead seat).
Also fits other scales that use a Ø43.5mm hub seat — check your hub diameter before ordering.
 

Scale: 1/14 (cross-scale by hub size)
Diameter: 105mm
Width: 38mm
Inner diameter (bead seat): 43.5mm
Tread: Chevron / herringbone, deep lug
Compound: Soft high-friction rubber
Weight: 86g per tire; pack weight 86g (1PCS) / 171g (2PCS) / 343g (4PCS)
Insert: Foam (sponge) liner included
Wheels: NOT included
 

Tires and foam inserts only; wheels shown in photos are for display.
Match by hub diameter (Ø43.5mm), not by scale alone.
This is not an official Tamiya, Mercedes-Benz or Scania product.